Stay Connected

Alpha 70mm Throttle Body - B/D/F/H Series Zoom

Alpha 70mm Throttle Body - B/D/F/H Series

309-05-1050

$132.29

Add to Cart

Status:

In stock

Weight:

1.90 lbs.

Skunk2 is proud to introduce the 70mm Alpha Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines in its exclusive, fine shot-blasted surface finish. Skunk2’s Alpha Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.

 

A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands and the Skunk2’s 70mm Alpha Series Throttle Body delivers! Sealed ball bearings, a precision machined throttle plate and a honed oversized bore insures smooth operation on the most aggressive naturally aspirated and forced induction applications.

 

FEATURES:

Precision Die-Cast Aluminum
Fine Shot-Blasted Surface Finish
Precision Machined Brass Throttle Plate
Compatible w/ OEM Throttle Cable
Needle Bearings with Seals For Smooth Leak Free Operation
New Throttle Body Gasket and Hardware
Idle Adjustment Screws for Fine Tuning

 

** NOTE: Throttle Body requires proper TPS adjustment after install. Tune is needed for optimal results. Professional installation recommended.

  • 1990 - 1997 Honda Accord (2.4L DX/LX/EX/SE)
  • 1992 - 2000 Honda Civic (1.6L DX/EX/GX/HX/LX/Si)
  • 1993 - 1997 Honda Del Sol (1.6L S/Si/VTEC)
  • 1992 - 2001 Honda Prelude (2.2L Base/Type SH)
  • 2000 - 2009 Honda S2000 (2.2L F22C)
  • 1990 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)

NOTE: Due to Larger Diameter... You Must Use A Skunk2 Pro Series Intake Manifold or Make Adjustments to Intake Manifold Throttle Body Flange to Match Bore and Keep IAC (Idle Air Control) Passage Separate. Not compatible with B18C GS-R intake manifold. Not compatible with D Series engines featuring down-flow intake manifolds. Manual Transmission Only.


Fits F20C but NOT the F22C

Products

Recent updates

NEW: World's First Magnesium K

Posted: 09/21/2021

Wes Spry Shares Some Roller Ro

Posted: 09/15/2021

Tegiwa Skunk2 Camshaft Showdow

Posted: 09/09/2021

Builders Guide: Subaru BRZ / T

Posted: 05/19/2021

PRO Car Studio Talks Control A

Posted: 04/22/2021

Builders Guide: Mazda Miata

Posted: 04/07/2021

Skunk2 Has The Goods: 10,000rp

Posted: 02/26/2021

Camshaft Showdown! Tegiwa K Se

Posted: 02/25/2021

Skunk2 x Hoonigan: Behind the

Posted: 02/24/2021

HIN - Scottsdale, Arizona 2019

Posted: 06/18/2019

Hey! If you weren't able to attend this past HIN event, come and check...