Skunk2 Racing's "Drop-In" Camshafts are designed as a performance upgrade to stock or near stock vehicles running the 3 Lobe VTEC K20A/ K20A2/ K20Z1/ K20Z3 and K24A2 engines or cylinder heads. These camshafts will outperform the stock camshaft from idle to redline with no loss in drivability. DIC's are compatible with stock valve springs and retainers; however, a valve spring upgrade can always be considered beneficial.
Our DIC's incorporate the same cutting-edge Fast Ramp and AMAX features as our professional BMF and Ultra lines, which are responsible for increasing overall performance and producing unmatched response from idle to redline. You can expect optimized mid-range and top-end horsepower/torque with peak power moved up the RPM band, producing a seamless VTEC crossover!
- Fast Ramp - The same technology used in Formula One racing, where seat timing is reduced, which results in additional cylinder pressure and more torque but without compromising valvetrain longevity.
- AMAX - A Skunk2 design that simply maximizes the area under the lift curve but without compromising reliability or valvetrain stability. Skunk2’s profiles feature more duration than competitors’ at lifts above 1mm, resulting in greater efficiency and more power.
Independent tests have shown average gains to be in the neighborhood of +15-18 horsepower with the occasional +20-22 hp on really efficient combos! Drop-In cams are indeed drop-in but proper installation (checking all critical clearances and degreeing) and tuning are still necessary and many times may be the difference in the numbers you will see.
These Camshafts are "Drop-In" type camshafts - This only means that they do not require the use of aftermarket valvetrain components. A professional tune is highly recommended to ensure proper idle, air/fuel ratio, and peak performance. Proper installation is still necessary to achieve optimal performance gains.
Pro XP Valve springs (P/N 311-05-7380) + Titanium Retainers (P/N 308-05-0410) are recommended when using these camshafts in Forced Induction Application.
You may also be interested in the following product(s)
Products
- Engine
-
Induction
- Intake Manifolds
- Pro Series Intake Manifolds
- Ultra Race Intake Manifolds
- Ultra Street Intake Manifolds
- Plenum Spacers
- Fuel Rails / Fuel Hardware
- Composite Fuel Rails
- Ultra Race Fuel Rails
- Ultra Street Fuel Rails
- Throttle Bodies
- Sensors
- Adapters
- Intake Systems
- Thermal Gaskets
- Thermal Intake Manifold Gaskets
- Thermal Throttle Body Gaskets
- Intercoolers
- Exhaust
- Cooling
- Suspension
- Service Items
- Accessories
-
Apparel
- Headwear
- Sweatshirts
- T-Shirts
- Camo T-Shirt
- Haters Gon' Hate T-Shirt
- B-Power T-Shirt
- K-Power T-Shirt
- S2 Racetrack T-Shirt
- Go Faster T-Shirt
- Mofeta Dos T-Shirt
- Gear Headz T-Shirt
- Black Series Gear Headz T-Shirt
- Archetype T-Shirt
- Skunk2 Puerto Rico Edition - T-Shirt
- 20th Anniversary T-Shirt
- Skunk2 Philippines Edition - T-Shirt
- 25th Anniversary T-Shirts
Recent updates
NEW: World's First Magnesium K
Posted: 09/21/2021Wes Spry Shares Some Roller Ro
Posted: 09/15/2021Tegiwa Skunk2 Camshaft Showdow
Posted: 09/09/2021Builders Guide: Subaru BRZ / T
Posted: 05/19/2021PRO Car Studio Talks Control A
Posted: 04/22/2021Builders Guide: Mazda Miata
Posted: 04/07/2021Skunk2 Has The Goods: 10,000rp
Posted: 02/26/2021Camshaft Showdown! Tegiwa K Se
Posted: 02/25/2021Skunk2 x Hoonigan: Behind the
Posted: 02/24/2021HIN - Scottsdale, Arizona 2019
Posted: 06/18/2019Hey! If you weren't able to attend this past HIN event, come and check...