Stay Connected

'06-'11 Civic Si Cold-Air Intake Zoom

'06-11 Civic Si Cold-Air Intake

343-05-0100

$346.99

Temporarily Out of Stock

Status:

Temporarily Out of Stock

Weight:

12.00 lbs.

Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the ’06-11 Civic Si. The results are the best performing, best fitting intake system available.

 

Skunk2’s Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5-inch internal diameter lower tube and a tapered, 3.5-inch to 3.0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don’t utilize MAF sensors.

 

In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2’s design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors’ designs that locate the air filter from the side. That, combined with a design that doesn’t require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions.

 

Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2’s unique design and brackets allow for the OEM battery to be retained. A specially shaped, silicone upper radiator hose is also included with each kit to ensure maximum clearance for the intake tubing and proper fitment.

 

Skunk2 developed its unique Cold-Air Intake system in 2009 for back-to-back Grand-Am champions and racing partners Compass360 Racing. Now that the team is retiring its eighth-generation Civic race cars, we can finally release this race-proven technology to enthusiasts.

  • 2006 - 2011 Honda Civic (Si)
  • Resources - Skunk2 How-To: '06-'11 Civic Si Cold-Air Intake Install

    Skunk2's all-new Cold-Air Intake system for the '06-'11 Civic Si is the most comprehensive kit available. Learn more about Skunk2’s all-new intake system and how to properly install it.

    ... [Read more]
    Resources - '06-'11 Civic Si Cold-Air Intake Review

    Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the ’06-’11 Civic Si. The results are the best performing, best fitting intake system available.

    ... [Read more]
    Complement your Cold-Air Intake with a Pro Series Intake Manifold and Pro Series Throttle Body for increased airflow.

    Products

    Recent updates

    Product Highlight

    Posted: 06/20/2017

    Pro, Ultra Street, and Ultra Race Intake Manifolds Product Highlight.....

    May 6th, 2017 Raceworz Recap

    Posted: 05/09/2017

    Skunk2 Racing was a proud vendor at Raceworz inn Fontana on May 6th, 2...

    Ultra Race Manifolds

    Posted: 03/31/2017

    Skunk2 Racing Ultra Series Intake Manifolds are the phenomenal next ge...

    Universal High Velocity Intake

    Posted: 03/27/2017

    The Skunk2 Universal High Velocity Intake Kit reduces heat soak and ma...

    Skunk2 Racing Radiator Hose Ki

    Posted: 03/24/2017

    Skunk2 Racing Silicone Radiator Hoses are handmade using high-quality,...

    Alpha Series Radiators

    Posted: 03/22/2017

    Skunk2 Racing Alpha aluminum radiators are a perfect direct fit upgrad...

    March 4th, 2017 RaceWars USA R

    Posted: 03/10/2017

    Skunk2 Racing was a proud vendor at RaceWars USA in Irwindale on March...

    2017 Drag Racing Nationals Rec

    Posted: 02/08/2017

    Battle of the Imports and Domestics, February 3-4th, 2017...

    Ultra Series Centerfeed Intake

    Posted: 12/28/2016

    Skunk2 Ultra Series Centerfeed Intake Manifolds are available for Hond...

    Ultra and Alpha LCA's

    Posted: 12/09/2016

    Skunk2 Ultra and Alpha Rear Lower Control Arms are direct replacements...